Nirav Patel

Nirav Patel                                                                           
Electrical Engineer                                                     
                                                                                                 

CAREER OBJECTIVE
Electrical Engineer with 11 years of experience in maintenance, installation, commissioning, services in petrochemical, EPC Contract for project execution. Performed schedule maintenance, troubleshoot malfunction, supervise electrical technician, and repair electrical system. Looking career growth opportunity in your organization.

EXPERIENCE
Company:- Nirmitee Construction and PMC (Surat Gujarat)
Project: - Surat Airport
Position: - Site Engineer Electrical (E & M)
July 2021 to Till Date
• Review for technical data sheet and Schematic , Detail, Working, Shop drawing as per tender requirements, Study of machinery plan & process, study of contract scope documents, Prepare indent for material, prepare measurements for work executed, Certify contractor measurement and bills. 
Plan & distribute work and monitor daily site activities, Inspection of contractors quality.
• Prepare electrical requirement, cooling system requirement & take statutory approval from client. Experience in preparation, review, approval of following procurement deliverables, Material Requisition, Purchase Requisition and Vendor Drawing Review and approvals for Electrical Equipment.
• Review and forward any comments on the contractors method statements for installation execution of the works and testing and commissioning of electrical system, Review and forward any comments on the technical queries raised by the contractor, Review and forward any comments on the contractor technical submittals, Review the site progress and implement it on contractors bill.
• Verify that electrical equipment compliant to design, and instruct of corrective action during commissioning. Control commissioning of electrical equipment. Lead and control power supply to substations and to field equipment. Commissioning of electrical equipment including MCC, Motor, HV and LV Electrical Panel, UPS etc.
• Arrange and control the access and permits to perform works at energized electrical equipment. Ensure completeness and quality of works performed by commissioning contractor. Verify all settings and parameters of relay protections. In case of any discrepancies, approve the required changes to setting and parameters. Inspection of electrical equipment and approved for commissioning sites. 
• Inspection of fit up and welding for MS piping, DFT check, Inspection of supplied material, ensuring the correctness of HVAC chiller, piping, installations as per approved drawing. And inspection for installations for quality. Coordinating with other packages for clash free and smooth progress at site.  

Company: - Joy Thomas Engineering Pvt Ltd (Surat Gujarat)
Project:- Reliance Industries Ltd                                                
Position:- Electrical Maintenance Engineer 
April 2018 to July 2021
• Operation and maintenance of LT/HT substation 22/0.433kv transformer, motors, DG Cummins  make, VCB Siemens make, ACB ABB Make ,DOL Starter, Star Delta Starter, VFD Dan Foss Make, HVAC system AHU, FCU, Pumps, Chiller Carrier Make in chemical plant.
• Daily energy consumption reading and report it to Manager and energy conservation, attend lighting maintenance complaints.
• Read single line diagram and fault correction, Develop policies and standard 
• Providing technical support and training on new equipment, administration of multiple contracts.
• Adhering to all safety and performance regulation.
• Assist in forecasting requirements, creating a budget and scheduling expenses for electrical department.
• Develop maintenance and inspection procedure and ensure implementation. Plan all repair and maintenance activities. Monitor equipment inventory and place order when required. Keep maintenance log and report daily activities. 
• Coordinate with other department for solve problems. Motor dismantle and assemble.

Company: - Al Shirah Recruitment Services (ADNOC Group Of Company)
Project: - Abu Dhabi Polymer Company Limited (Borouge ABU DHABI- UAE)
Position: - Electrical Technician (Maintenance)
October 2014 to January 2018
• Carried out the maintenance troubleshooting, pre. Commissioning and commissioning of Electrical Equipment and system in Hazardous environment as per standard procedure and accordance with the company policies oil and gas facilities with Utility, Polypropylene, Polyethylene and Low density polyethylene Plants.
• HT/LT motors, transformers & Generator Medium & low voltage panels with the system
voltage11KV,3.3KV,415V with Air Circuit Breake, vacuumbreakers and vacuum contactors switch protection relay.    
• AC and DC UPS 120KVA, Battery Charger, Batteries, Power Factor Panel.
• Having skill in the operation & execution of HV and LV system switching procedure Involved in commissioning and start up activities of 11kv, 3.3kv,415volts switchboard, transformers, motors, ups.
• Capabilities to read all control, power, schematic wiring diagram and familiar with electrical 
Code, area Classifications relating to hazardous area.
• Illumination Test Function Test of RTD and Power interlock test.
• Inspection and implementation of circuit breakers, transformers, motors, generators, VFD’s   &lightingpanelsLiaising with Vendors to execute testing & uploading for relayprotections & parameters of different makes.
• Working exposure on relay modules like REM, REF, for all sort of protections, say 50, 51, 87, 27, 49 etc.
• Earned experiences for completing highly taxing Schematic tests, simulation checks & interlock test for switchgears.
• Carrying out walk downs and site visits for punch lists & preservations for the steady progress of project ensuring safety.
• Analyzing & troubleshooting the problems on motor feeders to perform solo runs of LV & MV motors. Regarded as the best startup team member for closing maximum punch points initiating steady growth for startup and hosted presentations briefing the status for commissioning programs in managerial levels.
• Actively participated in 33/11kv switch gear bushing replacement, glandding, termination, breaker services during shutdown.

Company: - Siemens Ltd. (Through GBS)
Project: - Mumbai International Airport Ltd, Mumbai (India)
Position: - Electrical Maintenance Engineer.
November 2013 to September 2014
• Supervises and assigns the work of maintenance Electricians. Inspects work for completeness.
• Determines material, equipment, and supplies to be used.
• Condition monitoring and Predictive maintenance of critical equipments and corrective actions to avoid breakdown.
• Coordination with various departments for smooth functioning of the equipment by feedback and suggestion from them.

Company:- Shree Ram Electricals, Surat
Project:- Reliance Industries Limited, Surat-Hazira (India)
Position:-Maintenance Electrical Supervisor.         
July 2011 to November 2013
• Daily maintenance based on SAP, trouble shooting following stringent safety and quality standards.
• Need based implementation of modification, management of change for reliability, safety and quality improvement.
• Annual shutdown planning and execution of the plant and equipments.
• Manpower planning for the shutdown and breakdown of plant/Equipments.
• Carrying out plant audit and ensuring the compliances of audit points.
• Testing electrical equipment (Motor testing, Earth pit resistance checking) and maintaining their record as per the ISO standard.
• Identification and compliance of the electrical equipment as per appropriate Hazardous area classification. Awareness to all technicians about hazardous & safety.

• Preventive, Predictive, proactive & Breakdown maintenance of L.T & H.T Substation Panel, Motor, Generator, UPS, Transformer Equipment 
SKILLS
• Maintenance Engineering
•  Breakdown Maintenance
•  Installation
• Communicating proficiently, Being proactive and responsible, Being professional and adaptable, Managing resource, Making good decision, Understanding health and safety requirements, Working with teams and own initiative
•  Commissioning
• Safety Management
• Documentation
• Window 98,XP,
• MS Office

     ACADEMIA

     2010 B.E Electrical Engineer From
     SCET/Veer Narmad South Gujarat 
     University, Surat
PERSONAL DETAILS
     Date Of Birth:- 11th September 1986
     Gender:- Male
     Marital Status:- Unmarried
     Nationality:-Indian
     Passport Number:-U3815999
     Address:- Vansi Street, Post- Dumas, Surat, Gujarat, India
DECLARATION
             I assure you that above stated information are   true to best of my knowledge and I Would work in your organization with sincerity and honesty.
                                                                                                                            Your Sincerely                                                                                                                                       Nirav Patel

EXPERIENCE
Company:- Nirmitee Construction and PMC (Surat Gujarat)
Project: - Surat Airport
Position: - Site Engineer Electrical (E & M)
July 2021 to Till Date
• Review for technical data sheet and Schematic , Detail, Working, Shop drawing as per tender requirements, Study of machinery plan & process, study of contract scope documents, Prepare indent for material, prepare measurements for work executed, Certify contractor measurement and bills. 
Plan & distribute work and monitor daily site activities, Inspection of contractors quality.
• Prepare electrical requirement, cooling system requirement & take statutory approval from client. Experience in preparation, review, approval of following procurement deliverables, Material Requisition, Purchase Requisition and Vendor Drawing Review and approvals for Electrical Equipment.
• Review and forward any comments on the contractors method statements for installation execution of the works and testing and commissioning of electrical system, Review and forward any comments on the technical queries raised by the contractor, Review and forward any comments on the contractor technical submittals, Review the site progress and implement it on contractors bill.
• Verify that electrical equipment compliant to design, and instruct of corrective action during commissioning. Control commissioning of electrical equipment. Lead and control power supply to substations and to field equipment. Commissioning of electrical equipment including MCC, Motor, HV and LV Electrical Panel, UPS etc.
• Arrange and control the access and permits to perform works at energized electrical equipment. Ensure completeness and quality of works performed by commissioning contractor. Verify all settings and parameters of relay protections. In case of any discrepancies, approve the required changes to setting and parameters. Inspection of electrical equipment and approved for commissioning sites. 
• Inspection of fit up and welding for MS piping, DFT check, Inspection of supplied material, ensuring the correctness of HVAC chiller, piping, installations as per approved drawing. And inspection for installations for quality. Coordinating with other packages for clash free and smooth progress at site.  

Company: - Joy Thomas Engineering Pvt Ltd (Surat Gujarat)
Project:- Reliance Industries Ltd                                                
Position:- Electrical Maintenance Engineer 
April 2018 to July 2021
• Operation and maintenance of LT/HT substation 22/0.433kv transformer, motors, DG Cummins  make, VCB Siemens make, ACB ABB Make ,DOL Starter, Star Delta Starter, VFD Dan Foss Make, HVAC system AHU, FCU, Pumps, Chiller Carrier Make in chemical plant.
• Daily energy consumption reading and report it to Manager and energy conservation, attend lighting maintenance complaints.
• Read single line diagram and fault correction, Develop policies and standard 
• Providing technical support and training on new equipment, administration of multiple contracts.
• Adhering to all safety and performance regulation.
• Assist in forecasting requirements, creating a budget and scheduling expenses for electrical department.
• Develop maintenance and inspection procedure and ensure implementation. Plan all repair and maintenance activities. Monitor equipment inventory and place order when required. Keep maintenance log and report daily activities. 
• Coordinate with other department for solve problems. Motor dismantle and assemble.

Company: - Al Shirah Recruitment Services (ADNOC Group Of Company)
Project: - Abu Dhabi Polymer Company Limited (Borouge ABU DHABI- UAE)
Position: - Electrical Technician (Maintenance)
October 2014 to January 2018
• Carried out the maintenance troubleshooting, pre. Commissioning and commissioning of Electrical Equipment and system in Hazardous environment as per standard procedure and accordance with the company policies oil and gas facilities with Utility, Polypropylene, Polyethylene and Low density polyethylene Plants.
• HT/LT motors, transformers & Generator Medium & low voltage panels with the system
voltage11KV,3.3KV,415V with Air Circuit Breake, vacuumbreakers and vacuum contactors switch protection relay.    
• AC and DC UPS 120KVA, Battery Charger, Batteries, Power Factor Panel.
• Having skill in the operation & execution of HV and LV system switching procedure Involved in commissioning and start up activities of 11kv, 3.3kv,415volts switchboard, transformers, motors, ups.
• Capabilities to read all control, power, schematic wiring diagram and familiar with electrical 
Code, area Classifications relating to hazardous area.
• Illumination Test Function Test of RTD and Power interlock test.
• Inspection and implementation of circuit breakers, transformers, motors, generators, VFD’s   &lightingpanelsLiaising with Vendors to execute testing & uploading for relayprotections & parameters of different makes.
• Working exposure on relay modules like REM, REF, for all sort of protections, say 50, 51, 87, 27, 49 etc.
• Earned experiences for completing highly taxing Schematic tests, simulation checks & interlock test for switchgears.
• Carrying out walk downs and site visits for punch lists & preservations for the steady progress of project ensuring safety.
• Analyzing & troubleshooting the problems on motor feeders to perform solo runs of LV & MV motors. Regarded as the best startup team member for closing maximum punch points initiating steady growth for startup and hosted presentations briefing the status for commissioning programs in managerial levels.
• Actively participated in 33/11kv switch gear bushing replacement, glandding, termination, breaker services during shutdown.

Company: - Siemens Ltd. (Through GBS)
Project: - Mumbai International Airport Ltd, Mumbai (India)
Position: - Electrical Maintenance Engineer.
November 2013 to September 2014
• Supervises and assigns the work of maintenance Electricians. Inspects work for completeness.
• Determines material, equipment, and supplies to be used.
• Condition monitoring and Predictive maintenance of critical equipments and corrective actions to avoid breakdown.
• Coordination with various departments for smooth functioning of the equipment by feedback and suggestion from them.

Company:- Shree Ram Electricals, Surat
Project:- Reliance Industries Limited, Surat-Hazira (India)
Position:-Maintenance Electrical Supervisor.         
July 2011 to November 2013
• Daily maintenance based on SAP, trouble shooting following stringent safety and quality standards.
• Need based implementation of modification, management of change for reliability, safety and quality improvement.
• Annual shutdown planning and execution of the plant and equipments.
• Manpower planning for the shutdown and breakdown of plant/Equipments.
• Carrying out plant audit and ensuring the compliances of audit points.
• Testing electrical equipment (Motor testing, Earth pit resistance checking) and maintaining their record as per the ISO standard.
• Identification and compliance of the electrical equipment as per appropriate Hazardous area classification. Awareness to all technicians about hazardous & safety.

• Preventive, Predictive, proactive & Breakdown maintenance of L.T & H.T Substation Panel, Motor, Generator, UPS, Transformer Equipment

B.E Electrical Engineer