About Rajesh kumar:
- Autonomy and Rigor.
- The motivation of staff from various horizons.
- Ability to adapt to complex project organizations within a new environment.
- Export experience if possible.
- English speaking
Experience
Company | : | Alstom Dubai |
Project | : | RSK-Jebel Ali Depot |
Position | : | Warranty Support Engineer |
Year | : | Feb 2019 to Dec 2020 |
Duties & Responsibilities:
- Troubleshooting and fault finding during commissioning and revenue service of trains.
- Train CAR to CAR couplingØ & Installation of Jumper Cables.
- Checking and replacing the Gearbox oil every 20000km.
- Checked and replaced the Interior salon lights and Palm Tree, Diffusers.
- A mechanical and electrical activity like checking the Voltage in LV and HV panels.
- Installing the components like Ladders, Earth Bride, WFL
- Taking logs of PACIS, CVS, TRACTION, EVR, MPU, (BCU)Brake & etc.
- Uploading software in Traction, Auxillary Power Supply, Edcu, Brake Control Unit,
- Fault troubleshooting TCMS, Door, CVS & Traction Control Unit.Riom Check
- IOS Troubleshooting and Installation of Master Control Unit,
- Understanding the Line wiring diagrams routine in MCU, Gangway Cubical Left Panel(GCL) and (GCR)
- Familiar with Door AdjustmentØ & Maintenance of the Doors.
- Collection of failure data, failure analysis and troubleshooting of faults.
- All WARRANTY-related activities.
- Proper planning of the activities to achieve the target with available resources.
- Planning for Train Movement for Troubleshooting and CR(Change Request).
- Performed Routine Static Tests (Factory Serial Tests) Routine Dynamic Tests and day-to-day T&C & Warranty activities.
- Performed incoming inspections of the train as well as worked on the modification of the mechanical as well as electrical systems of the Trains.
Company | : | Fujita Corporation, Doha, Qatar |
Project | : | DT-RSD-Red Line & Green Line Depot |
Position | : | Trackwork Engineer |
Year | : | Dec 2016 to Feb 2019 |
(Doha Metro Rail Project - Red Line Depot: 18.3 Track KM, Green Line Depot: 9.23 Track KM, Gold Line Depot: 4.12 Track KM)
Duties & Responsibilities:
- Supervise and give guidance to Maintenance Teams in carrying out all levels of preventive and corrective maintenance activities for mainline and depot running rail, an inspection of turnouts and switches, an inspection of the fastening system and buffer stops, and an inspection of the third rail. Rail renewals, installation, ultrasonic testing and rail grinding. Replacement of rail and power rail.
- Follow the appropriate maintenance procedures and instructions to ensure compliance with the requirements.
- Conduct performance reviews for Track Team Leaders and Track Technicians.
- Assist Track Manager in maintenance program and planning.
- Guide Track Team Leaders to maintain a safe system of work.
- Assist the Track Manager or other technical support in implementing complex systems .or new projects.
- Method Statement & Technical Submission.
- Acting Area Manager & Project Supervision, Track & Civil.
- Project Railway Systems Interface & Coordination.Construction Supervision & Quality Control.
- Signalling Systems & other Railway Systems, and Trackwork Construction Management & Supervision.,
- Handling day-to-day technical matters.
- Monitor the progress of all project participants and integrate with program delivery targets.
- Participating in project construction meetings. Chairing subcontractor’s weekly meeting.
- Coordinate trackwork development from the design stage to the as-built stage.
- Initiate and plan to close all outstanding items to achieve the handover key dates.
- Assisting the construction team to meet the schedule and weekly plan.
- Follow the appropriate maintenance procedures and instructions to ensure compliance with the requirements.
- Preparation of Site Quality Plans, Method Statements for Installation and Checklists.
Company | : | GATES PCM Construction Ltd, Singapore |
Project | : | East-West Line Third Rail Replacement Project |
Position | : | Track Work Engineer |
Year | : | May 2015 to Nov 2016 |
(EAST WEST LINE Rail Project – Singapore, (Mainline: 65 Track KM, Depot: 12 Track KM)
Duties & Responsibilities:
- Project Management Consulting Permanent Way / Trackwork discipline.
- Project management of Design and Build Trackwork Contract on behalf of the Client.
- Formulated the Schedule of Dimensions of East-West Metro.
- Selection analysis of Head Hardened rails over normal rails.
- Selection analysis of track fastenings between Pandrol & Vossloh fastenings.
- Design Review of interfacing detailed design submissions of Underground contractors,
- Verification and updating of schedule programme for Trackwork.
- Estimation of Quantities of Trackwork.
- Manage interfaces with Trackwork and other disciplines.
- Day-to-day construction checking and site supervision of laying of Ballastless and ballasted Tracks.
- Contract management of Trackwork contract and change control...
- Perform and carry out duties as instructed/ directed by the Project Manager.
- Prepared the bill of materials for the entire project.
- Prepared tools & Equipment required for the Pre-construction Survey of the site.
- Responsible for survey team and installation, Coring and grouting team.
- Ensuring the proper application of work method statements.
- Providing technical assistance to the construction team and ensuring the design input rightly communicate to the construction team.
- Inspect Trackwork construction(Ballastless track & turnout)
- Prepared the monthly detailed report for the installation progress for submitting to Main contractors(SMRT)
- Strong organizational skills, detail-oriented, and the ability to handle multiple priorities.
Company | : | Alstom Transport India Ltd. India. |
Project | : | Chennai Metro Rail Project |
Position | : | CAD – Design Engineer |
Year | : | Aug 2011 to July 2014 |
(Chennai Metro Rail Project –Mainline: 90 Track KM, Depot: 14 Track KM)
Duties & Responsibilities
- Complete documentation packages from detailed engineering drawings, construction drawings, and shop drawings to as-built drawings and produce drawing sets.
- Drafting and Designing review of Rail Turnouts and Alignments.
- Structural engineering plans, design and layout. Layout and detail portions of projects using a schematic layout by the project lead engineer.
- Conducts site visits, and inspections and reviews all material submittals and design drawing approval.
- Prepared the layout drawings for the Installation of Rails, Brackets, cable terminals, Expansion joints, Ramps, and Isolated rail Joints (IRJ).
- Research design options for project lead engineer.
- Effectively communicate project progress and issues to the design team and maintain communication with the team members throughout the project.
- Responsible to get the clearance for issuing the layout drawings.
- Responsible to prepare the as-built drawing once the installation is completed.
- Perform inspection and witness tests as and when required.
- Inspect site conditions based on working drawings.
- Review Track alignment for Viaduct, OHE Mast drawing for Viaduct section, Schematic layouts for the entire Project, single line electrification drawing for station & station layouts..etc
- Prepare all required professional documents and reports that are needed to carry out and complete a project.
- Coordinate technical documents.
- Develop and implement designs and drawings from preliminary concepts and sketches.
- Preparation of general arrangement of Rail Track Alignment Design using Bentley IN RAIL.
- Preparation of general Layout & Sectional drawings for Station & Tunnel.
- Preparation of AS-BUILT drawings for depot stations & tunnel.
Company | : | Asia Rail Engineering (S) Pte Ltd, Singapore |
Project | : | Down Town Line 3 |
Position | : | Coordination Engineer (Client CTCI Corporation-Taiwan) |
Year | : | May 2010 to Aug 2011 |
Duties and Responsibilities
- To ensure that the Trackwork design is implemented in compliance with the contract and that the design is compatible with the highest standards of health & safety.
- Involved in Interface Coordination meetings with System-wide contractors for Trackwork.
- Assist and support local Engineers and Cad operators
- To ensure efficient coordination with other parties,
- Management/follow-up of the Track alignment design deliverables list (documents, reports, drawings, proposals etc)
- Obtain all input data needed to design the Trackwork interfaces,
- Reporting directly and regularly to the Trackwork Technical Manager and Design Manager on the progress and status of design activity and reporting any deviations from targets, schedules, quality, delays etc….
- Design & Review of CSD/SEM Drawings for Trackwork Layout & sections.
- Check the Alignment Drawings in the Power Rail Overhead Line.
- Inspect site conditions based on working drawings.
- Inspect the trackwork and supervise the track maintenance
- Inspect the Flash butt welding activities in IRJ, Turnout and rails in the track.
- Supervising the concrete strength in track laying...
- Coordinate technical documents.
- Preparation of general arrangement of tunnel Alignment Design using Bentley V8i
- Preparation & Reply to Design Change Notice (DCN) for Drawings to authorities.
Company | : | Samsung C&T, Singapore |
Project | : | C486 Marina Bay Expressway Project |
Position | : | Project Engineer |
Year | : | Sep 2009 to May 2010 |
Duties & Responsibilities
- Drafting and Designing review of Alignments.
- Experienced in the design and detailing of reinforced concrete essentials.
- Visit work sites at the time of erection for drawing clarifications & as-built checks.
- Review all submission drawings to ensure the Architectural/ Building design is complying with the authority's requirements.
- Design of Jigs & Fixtures for tunnel systems.
- Able to read and create Isometric, Schematic diagrams, and Single-Line diagrams for structural.
- Preparation of general arrangement of tunnel Alignment Design using Bentley V8i
- Inspect site conditions based on working drawings.
- Preparation of general Layout & Section drawings for Tunnel.
- Preparation of AS-BUILT drawings for a tunnel, roads bridges & Stations.
- Preparation of general rebar drawings.
Company | : | Alstom Transport (S) Pte Ltd, Singapore |
Project | : | C810 Circle Line Project |
Position | : | CAD Operator |
Year | : | Dec 2006 to Sep 2009 |
Duties & Responsibilities
- Complete documentation packages from detailed engineering drawings, construction drawings, and shop drawings to as-built drawings and produce drawing sets.
- Drafting and Designing review of Rail Turnouts and Alignments.
- Design of Jigs & Fixtures, Walkways, Ramps, staircases, walkway ramps, detail sectional drawings, such as mechanical and electrical components, and communication cables, involved inside the walkways for Rail systems.
- Produce product detailed drawings of mechanical components.
- Perform inspection and witness tests as and when required.
- Able to read and create Isometric, Schematic diagrams, and Single-Line diagrams for structural.
- Inspect site conditions based on working drawings.
- Coordinate technical documents.
- Review all submission drawings to ensure the Architectural/ Building design is complying with the authorities' requirement
- Develop and implement designs and drawings from preliminary concepts and sketches.
- Check and verify design drawings to conform to specifications and design data.
- Preparation of general arrangement of Rail Track Alignment Design using Bentley IN RAIL.
- Preparation of general Layout & Sectional drawings for Station & Tunnel.
- Preparation of AS-BUILT drawings for depot stations & tunnel.
Education
Diploma in Autobilemobile Eng
BE in Mechanical
Professionals in the same Construction / Facilities sector as Rajesh kumar
Professionals from different sectors near Chennai, Chennai district
Other users who are called Rajesh
Jobs near Chennai, Chennai district
-
detail design engineer
Found in: Talent IN C2 - 1 day ago
HELLA Chennai, IndiaDETAIL DESIGN ENGINEER -CHE 3 · Location Chennai - Tamil Nadu, India Pacesetting. Passionate. Together. HELLA, one of the leading automotive suppliers worldwide, has shaped the industry with innovative lighting systems and vehicle electronics. In addition, the company is one of ...
-
Female Sales Coordinator
Found in: Talent IN C2 - 6 days ago
GOOD FIVE YES JOB CONSULTANCY Chennai, IndiaFemale SalesCoordinator · Exp: 13 yrs · Edu: Any Degree · Package: 18 20 K · Location: VanagaramChennai · Skills: Customer handling Constructionexperience is preferred · Qualifications and Skills · 13 years ofexperience in a sales or customer service role · Excellent comm ...
-
Graphic Designer
Found in: Talent IN C2 - 1 day ago
Access Healthcare Services Chennai, IndiaAccess Healthcare is seeking a talented graphic designer and video editor to join our Corporate Communications team, to own and execute the production of marketing collaterals in digital and offline media. The candidate should have hands-on professional experience in Adobe Photos ...